 |
|
|
| SPECIALITY
CHEMICALS >> Textile
>> MAKSOFT-SPW |
|
|
|
|
Cationic finishing agent for jute, synthetic & cellulosic fibers |
|
CHARACTERISTICS
PROPERTIES |
|
|
|
Cationic Softeners have been well established on all fibers natural and synthetic but lack durability to washing
treatments. By virtue of their affinity for fibers, the conventional softeners are absorbed by treated textiles in
exhaust application but they cannot withstand washing treatments. The product is wash fast on all synthetic
fibers including polyamide, polyester and
polacrylic. is non-yellowing in character. It does not
MAK-SOFT-SPW affect the shade nor the fastness properties to light and wet treatments. When applied within the recommended
dosage levels, MAK-SOFT-SPW does not promote thermomigration of disperse colour dyes on polyester. |
|
|
|
| Aspect |
: |
Brownish yellow, clear to hazy liquid. |
| Chemical Composition |
: |
Derivative of fatty acid condensation product. |
| Ionic Nature |
: |
Cationic. |
| pH (100g/1) |
: |
2.5- 3. |
| Miscibility in Cold &
Warm Water |
: |
Good. |
| Stability
to |
: |
Good. |
| Hard
Water |
: |
Good. |
| Dilute Acids |
: |
Good. |
| Dilute Alkalies |
: |
Turbidity may occur, this does not effect stability. |
| Cationic Products |
: |
Good. |
| Non-lonic Product |
: |
Good. |
| Anionic Products |
: |
Incompatible. |
| Cross Linking Agents |
: |
Needs Pretrial. |
| Solids |
: |
20 ± 1. |
| Effect on deying / prints |
: |
Not appreciable either on shade or on fastness. Heavy
dosage may promote thermomigration in dyed Polyester. |
| Effect on White Goods |
: |
Non-yellowing upto drying temperature of 120 Deg C. |
| Stability to Finish to Mild
Washing at 60 deg C |
: |
Good. |
|
|
|
APPLICATION |
|
liquid is diluted in warm water I:10. the resulting solution is added to the finish
bath MAK-SOFT-SPW
|
|
liquid is recommended as self finish on Polyamide, Polyester and Polyacrylic fibre material. It is
MAK-SOFT-SPW applied either by exhaust method or in padding and drying. |
Exhaust Application
0.5- 2% liquid on weight of goods MAK-SQFT-SPW |
|
Adjust pH 6-7 with sodium bicarbonate |
Continuous Method
Pad in
10 - 20 gpI liquid at ph 4 to approximately 60-70 wet pick up and dry at 110-120 c a higher
drying temperature is not recommended MAK-SOFT-SPW |
Partial Replacement Of Silicone
liquid could also be used to partially replace silicone in a fnish it has been observed that
without affecting the feel upto 50 of the silicone used could be replaced by MAK-SOFT-SPW liquid.
MAK-SOFT-SPW |
| liquid imparts excellent softness to polyester / cellulose, Polyester/wool blends in combination
with other finishing agents MAK-SOFT-SPW |
|
|
|
|
 |
|
